HP VMA-series Memory Arrays - Manual (Page 171)

AM456-9026A HP VMA SAN Gateway User’s Guide 171
Shows media statistics, including read/write latencies as follows:
stats export
stats export <format> <report name> [filename <filename>] [after <date>
<time>]
[before <date> <time>]
Export statistics to file. Currently the only supported value for <format> is csv (comma-
separated value). The dataset to be exported is determined by the <report name> .
If a filename is specified, the stats will be exported to a file of that name; otherwise a name will be
chosen automatically and will contain the name of the report and the
time and date of the export. Any automatically-chosen name will be given a CSV extension. If the
user specifies a name, .csv will be added if it is not already part of the name.
Either one, both, or neither of the after and before parameters may be specified. These place
boundaries on the timestamps of the instances to be exported. When one of these parameters is
specified, two words must follow, one for the date and one for the time. A hyphen ( - ) may be used
in the <time> field as an abbreviation for midnight. The date and time specified are interpreted as
local time according to the currently configured timezone. As elsewhere in the system, the date
format must be yyyy/mm/dd , the time format must be hh:mm in 24-hour time.
The custom option should be a reserved report name (that is, no reports should be named that) to
leave room in the command set for later allowing the user to specify manually which series to
export.
If the filename is specified, it must come just after the report name. If the after and/or before
parameters are specified, they may come in either order relative to each other.
file stats
show files stats
Display a list of statistics report files.
all Displays media statistics for all devices.
block Displays media statistics for block devices.
continuous Displays media statistics continuously.
detail Displays media statistics with detail.
global Displays media statistics globally.