HP VMA-series Memory Arrays - Manual (Page 120)

120 HP VMA SAN Gateway User’s Guide AM456-9026A
show media health detail
The show media health detail command returns detailed information about block storage devices
on the local San Gateway including all of the S.M.A.R.T attributes and provides the status of each
attribute.
In the following example, the block id <id> option is used to identify a specific media device.
Media Read and Write Statistics
The show stats media commands enable you to view read and write rates (in MB per second)
for both the current ten-second sample and an average of the samples taken over the last five
minutes.
The show stats media command displays read and write statistics for block storage media
devices in one or more nodes in the cluster. The scope of each command is the same as the
corresponding show media command, described above.
SM075 [MY-vSHARE00: master] # show media health block id Strad130
detail
Location unknown-01:
Model: Violin Memory Array Est. life remaining: 96.0%
Serial no: Strad130 Health status: ok
SMART Attribute Type Raw value Norm Thres Status
-------------------------------------------------------------------
Reallocated Sector Ct Old age 0 100 0 ok
Power On Hours Old age 0 100 0 ok
Power Cycle Count Old age 0 100 0 ok
Unsafe Shutdown Count Old age 0 100 0 ok
Temperature Celsius Old age 54 54 0 ok
Host Write Count Old age 0 200 0 ok
Avail Reserved Space Old age 100 100 10 ok