Addonics Technologies HDUS11325DX - Manual (Page 13)

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Adv Setup
Adv Setup offers expert users access to more advanced system settings.
To access this option, hold down the ESC key for two seconds until it appears.
11. Adv Setup
Read Error Skip
This function sets the system to ignore any errors during the copying process. Normally if there is
an error during copying a warning is displayed on the LCD. By using this function, users can also
copy a HDD with errors.
11-01. Adv Setup
Read Error Skip
Update Firmware
This function is used to update the system's firmware. Download the latest version of the firmware
from the Internet at www.addonics.com. For the complete instructions, visit the firmware update
webpage or view the instructions found later in this manual.
11-02. Adv Setup
Update Firmware
Read Error Skip
Off
Press ENT to enter the following screen. By default this option is set to OFF. Use the up and down
buttons to enable or disable this option.
Quick Erase HDD
This function is used to quickly erase all data on the HDD . Please backup any important data
before using this function.
11-04.Adv Setup
Quick Erase HDD
Quick Erase HDD
ALL/Target CH:*
Press ENT to enter the following screen. Use the Up and Down buttons to select the HDD to
erase.
Compare Firmware
This function is used to compare the current system firmware version with the new version the user
is upgrading to. This ensures that the downloaded firmware is the latest version. The message
"Last update F/W" indicates that it is the latest version.
11-03.Adv Setup
Compare Firmware
Searching F/W ...
Please Wait ...
Last update F/W
OK!