HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 32)

Callout Area on the screen Information or capability that the area provides
2 Select A Menu Information menu Print device information pages, which provide
details about the device and its configuration.
Default Job Options menu Use this menu to define the default job options for
each function.
Time/Scheduling menu Use this menu to set options for setting the time
and for setting the device to enter and exit sleep
mode.
Management menu Use this menu to set up global device-
management options.
Initial Setup menu The Initial Setup menu allows access to setup
screens for Network and I/O, Fax, and E-mail.
Device Behavior menu Use this menu to determine the language, sounds,
timeout, and error behavior for the device.
Print Quality menu Use this menu to control the Print Quality settings
for the device.
Troubleshooting menu Get information about the device that you can use
to troubleshoot problems.
Resets menu Use this menu to restore settings to the initial setup
values.
3
Plus sign ( )
Click the plus sign next to a menu, or click the menu itself, to see the submenus
or subentries.
Using the menus on the Configure Device screen
The following procedure is provided only as an example. Similar procedures can be used to set other
menu items.
Follow these steps to print a Demonstration Page (example procedure).
1. Click INFORMATION.
2. Click Sample Pages/Fonts.
3. Select the check box for the PCL Font List, and then click Apply. The page prints at the device.
NOTE: Print drivers and software programs frequently override selections that are made on the
Printing menu and the Paper Handling menu. For more information, see the user guide that came with
your product. Any changes are reflected on the Device Status screen, the Configuration Page screen,
and the Paper Handling menu.
Table 3-1 Configure Device (continued)
20 Chapter 3 Configuring the product from the Settings screens ENWW