HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 51)

c. Type the LDAP server in the LDAP Server field.
d. Type
389
in the Port field.
5. Under the Searching the LDAP Database section, perform the following steps:
a. Paste the Search Prefix into the Search Root field.
b. Type in the sAMAccountName into the Match the name entered with the LDAP attribute
of field.
c. Find the device user e-mail address in the LDP trace. Copy the attribute defining the e-mail
address, and paste it into the Retrieve the device user’s e-mail address using attribute
of field.
Some Kerberos environments require very specific attributes. For example, the attribute used
here is
userPrincipalName
instead of
mail
.
d. Find the device user name using the attribute of in the LDP trace. Copy the attribute defining
the name, and paste it into the and name using the attribute of field.
NOTE: The Kerberos environment requires
cn
instead of
displayName
.
e. Click Apply.
When you have finished these steps, continue with the steps in the next section, Configure the
Authentication Manager for Kerberos Authentication on page 39 .
Configure the Authentication Manager for Kerberos Authentication
Follow these steps to continue configuring Kerberos Authentication for your product.
1. Click Authentication Manager on the Settings tab in the HP EWS.
2. Perform the following steps:
a. Under the Home Screen Access section, select Kerberos from the Log In At Walk Up drop-
down menu.
b. Under the Device Functions section, select Kerberos from the drop-down menus of desired
functions to be authenticated.
c. Optional: Under the Future Installations section, select Kerberos from the Newly Installed
Functions drop-down menu. By selecting this option, Kerberos authentication is automatically
applied to new device functions when they are installed on the product.
3. Click Apply.
When you have finished these steps, continue with the steps in the next section, Configure Address
Settings for Kerberos Authentication on page 39 .
Configure Address Settings for Kerberos Authentication
Follow these steps to continue configuring Kerberos Authentication for your product.
1. Click LDAP Settings on the Digital Sending tab in the HP EWS.
2. Click to select the Allow device to directly access an LDAP Address Book check box.
ENWW Kerberos Authentication 39