Send a fax using monitor dialing – HP Officejet Pro X576 Multifunction Printer series User Manual
Page 187
1.
Load the document into the document feeder.
2.
From the Home screen, touch the
Fax
button.
3.
Touch the
Fax Methods
button.
4.
Touch the
Send Fax Later
button.
5.
Use the keypad to enter the time of day to
send the fax. Touch the
OK
button.
6.
Use the keypad to enter the date to send the
fax. Touch the
OK
button.
7.
Use the keypad to type the fax number or
select one from the phone book/speed-dial list.
Touch the
OK
button. The product scans the
document and saves the file in memory until
the designated time.
Send a fax using monitor dialing
Monitor dialing allows you to dial a number from the printer control panel as you would dial a regular
telephone. When you send a fax using monitor dialing, you can hear the dial tones, telephone
prompts, or other sounds through the speakers on the printer. This enables you to respond to prompts
while dialing, as well as control the pace of your dialing.
TIP:
If you are using a calling card and do not enter your PIN fast enough, the printer might start
sending fax tones too soon and cause your PIN not to be recognized by the calling card service. If this
is the case, you can create a speed dial entry to store the PIN for your calling card.
NOTE:
Make sure the volume is turned on to hear a dial tone.
ENWW
Use fax
171