HP Officejet Pro X576 Multifunction Printer series - Manual (Page 175)

Receive-fax settings
Set fax forwarding
You can set your product to forward incoming faxes to another fax number. When the fax arrives at
your product, it is stored in the memory. The product then dials the fax number that you have specified
and sends the fax. If the product cannot forward a fax because of an error (for example, the number is
busy) and repeated redial attempts are unsuccessful, your product prints the fax.
If the product runs out of memory while receiving a fax, it terminates the incoming fax and only
forwards the pages and partial pages that have been stored in the memory.
When using the fax-forwarding feature, the product (rather than the computer) must be receiving the
faxes, and the answer mode must be set to Automatic .
1. From the Home screen, touch the Setup button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Fax Setup menu.
4. Touch the Fax forwarding menu.
5. Touch the Forward Fax button, and touch the On button.
6. Use the keypad to enter the fax-forwarding number, and then touch the Done button.
Block or unblock fax numbers
NOTE: Faxing blocking is only supported where the caller ID feature is supported.
If you do not want to receive faxes from specific people or businesses, you can block as many as 30
fax numbers by using the control panel. When you block a fax number and someone from that number
sends you a fax, the control-panel display indicates that the number is blocked, the fax does not print,
and the fax is not saved in memory. Faxes from blocked fax numbers appear in the fax activity log with
a “discarded” designation. You can unblock blocked fax numbers individually or all at one time.
NOTE: The sender of a blocked fax is not notified that the fax failed.
1. From the Home screen, touch the Setup button.
2. Touch the Fax Setup menu.
3. Touch the Basic Fax Setup menu.
4. Touch the Block Junk Faxes button.
5. Touch the Add Numbers button.
6. Use the keypad to enter the fax number that you want to block, and then touch the Done button.
ENWW Set fax settings 159