Sender receives a busy signal, A handset is connected to the product, A phone line splitter is being used – HP Officejet Pro X576 Multifunction Printer series User Manual
Page 208: No dial tone, Cannot send or receive a fax on a pbx line
NOTE:
Memory errors might occur if the faxes are not printed. The product will not answer if the
memory is full.
Sender receives a busy signal
A handset is connected to the product
●
Make sure the phone is hung up.
●
Change the
Answer Mode
option to match the product setup.
a. From the Home screen, touch the
Setup
button.
b. Open the
Fax Setup
menu.
c.
Open the
Basic Fax Setup
menu.
d. Open the
Auto Answer
menu.
e. Select
On
.
A phone line splitter is being used
●
If you are using a phone line splitter, remove the splitter and set up the phone as a downstream
phone.
●
Make sure the phone is hung up.
●
Make sure the phone is not being used for a voice call when faxing.
No dial tone
●
If using a phone line splitter, remove the phone line splitter and set up the phone as a downstream
phone.
Cannot send or receive a fax on a PBX line
●
If you are using a PBX phone line, contact your PBX administrator to configure an analog fax line
for your product.
192
Chapter 12 Fax
ENWW