HP NonStop G-Series - Manual (Page 212)

that switch.
Location in OSM tree: External ServerNet Fabric > Remote Switch
The last part of the switch name indicates the fabric and position of the switch in the topology.
Example: Remote Switch $ZZSMN.X2
Attributes
Remote Switch
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or
service is required.
Values
Physical
Configuration Tag
A parameter used by SCF and the guided procedures that allows
SANMAN to select an appropriate switch configuration block (SCB)
from the M6770CL switch configuration library. The selected SCB is
subsequently loaded on the specified switch. The configuration tag
determines the position of the cluster switch in the topology and the
ServerNet node numbers supported by the cluster switch.
Values
Example: Max 24 nodes, nodes 1-8
GUID
A unique, read-only number stored in nonvolatile memory
(SEEPROM) on a ServerNet II switch. The Globally Unique ID can be
used programmatically to identify the switch.
Fabric Setting
Whether the switch is configured for operation on the X fabric or the Y
fabric.
Values: X, Y, or Clear
Presence
Verification that the switch is installed and responding.
Values: Present, Absent, Unknown
Configuration Version
The version of the configuration file currently loaded on the switch.
Example: 1_5
Firmware Version
The version of the firmware currently loaded on the switch.
Example: 3_0_23
Actions
None.