HP NonStop G-Series - Manual (Page 96)

Process Pair
Redundancy Status
The fault-tolerance status of the disk environment.
Values: Fully Redundant, Redundancy Lost
Backup Process ID
The processor number and PIN of the current backup disk I/O process.
Example: 1,269
Primary Process ID
The processor number and PIN of the current primary disk I/O process.
Example: 0,296
Disk Pair
Disk Pair Name
The name of the disk paired with this one.
Example: External Disk $KLAM2M
Backup Path
SCSI ID An identification number assigned to the device when configured.
SCSI Controller
A number (1 or 2) that identifies the backup SCSI controller that manages
the disk.
Example: SCSI Controller (1.1.50.2)
Access State
The accessibility of the backup path.
Values: Inactive, Active
Configured Controller
Location
The location of the backup disk path SCSI controller.
Example: PMF.SAC-2.GRP-1.MOD-1.SLOT-55
Primary Path
SCSI ID An identification number assigned to the device when configured.
SCSI Controller
A number (1 or 2) that identifies the primary SCSI controller that manages
the disk.
Example: SCSI Controller (1.1.50.2)
Access State
The accessibility of the primary path.
Values: Inactive, Active
Configured Controller
Location
The location of the primary disk path SCSI controller.
Example: PMF.SAC-2.GRP-1.MOD-1.SLOT-50
Firmware