HP XP7 Storage - Manual (Page 109)

2. Moderate
3. Serious
4. Acute
The larger the number becomes, the more the message becomes important. The SVP reports all
SIMs related to Compatible FlashCopy operations. All SIMs are stored on the SVP for use by HP
personnel. The SIMs reported to the mainframe host are logged in the SYS1.LOGREC dataset of
the host operating system. Each time a SIM is generated, the amber Message LED on the control
panel (under the Ready and Alarm LEDs) turns on as an additional alert for the user. Remote Web
Console also displays the SIMs to provide an additional source of notification for the user.
For further information on SIM reporting, please contact your HP representative or the HP Support
Center.
The following figure shows a typical 32-byte SIM from the storage system.
Figure 37 Typical SIM showing reference code and SIM type
SIMs are displayed on the host console by reference code (RC) and severity. The six-digit RC
(composed of bytes 22, 23, and 13) identifies the possible error and determines the severity. The
SIM type (byte 28) indicates the component that experienced the error.
The following table shows the SIM related to BC Z operations:
Table 63 SIM
Description Importance level SIM type (byte
28) Reference code
SSB13 SSB23 SSB22
Copying process of Compatible FlashCopy ends
abnormally. Internally the relationship becomes Moderate FE YY 2X 4B
suspended by failure, and the T-VOL becomes partially
inaccessible.
•
"x" indicates the last digit of the T-VOL's CU
number (0x0 to 0xF).
• "YY" indicates the LDEV number of the T-VOL.
In the case of a tier memory access error,
SIM=4B4xYY is output rather than this SIM.
(Tier memory is an area for storing relationship
information.)
For SIM=4B4xYY, see the following item in this table.
Copying process of Compatible FlashCopy ends
abnormally because of a tier memory access error. Moderate FE YY 4X 4B
Internally the relationship becomes suspended by
failure, and the T-VOL becomes partially inaccessible.
•
"x" indicates the last digit of the CU number of the
failed volume (0x0 to 0xF).
• "YY" indicates the LDEV number of the failed
volume.
The Compatible FlashCopy relationship is
automatically withdrawn, and the T-VOL becomes Moderate F1 00 E5 47
SIM Reporting 109