HP XP7 Storage User Manual
Page 64
Table 35 Information displayed by the FCQUERY command (continued)
Definition
Displayed content
Displayed item
Volume specified by DEVN is currently used as the S-VOL of the Concurrent Copy
pair.
S
CC
Volume specified by DEVN is currently used as the T-VOL of the Concurrent Copy
pair, or not used for Concurrent Copy.
N
Displays whether the volume specified by DEVN is Revertible or not. However, since
Compatible FlashCopy does not support this function, "N" will always be displayed
for this item. For details about Revertible, see the IBM manual.
-
RV
The volumes specified by DEVN are TSE-VOLs.
Y
S
SE
2
The volumes specified by DEVN are not TSE-VOLs.
N
The volumes specified by DEVN are not source volumes of relationships containing
TSE-VOLs.
N
E
The volumes specified by DEVN are source volumes of relationships containing
TSE-VOLs.
Y
The volumes specified by DEVN are source volumes of relationships containing
TSE-VOLs, and at least one is in Failed State.
F
The volumes specified by DEVN are source volumes of relationships containing
TSE-VOLs, and at least one is in Write Inhibit.
I
The volumes specified by DEVN are source volumes of relationships containing
TSE-VOLs, and relationships in Failed State and Write Inhibit are mixed.
B
Displays the Sequence Number. However, since Compatible FlashCopy does not
support this function, "00000000" will always be displayed for this item. For details
about Sequence Number, see the IBM manual.
-
SEQNUM
Notes:
1.
In case the volume is set online in more than one LPAR defined by the mainframe system host.
2.
The SE item may not display correctly when the following conditions are satisfied at the same time:
• FCQUERY is executed with the SHOWRELS parameter omitted.
• The specified volume is the source volume of a volume relationship having 13 or more target volumes.
You can avoid this situation by specifying the SHOWRELS parameter when running FCQUERY. To omit detailed information
about the relationships, specify SHOWRELS(NO), which is equivalent to the omission of the SHOWRELS parameter.
Figure 26 Calculation example of the number of the relationships displayed in "ACT"
64
Performing Compatible FlashCopy operations