HP 3PAR Remote Copy Software - Manual (Page 229)

C.11 Bidirectional Synchronous Disaster Recovery Example
InForm OS Version 2.3.1 Remote Copy User’s Guide
4 Issue the showrcopy command and verify that the target displays ready, the sending links
display Up, and that the volumes are Syncing as shown in bold in the following example:
On InServ2 :
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServ1 2 IP ready mirror_config
Link Information
Target Node Address Status Options
InServ1 0 10.100.33.96 Up
InServ1 1 10.101.33.96 Up
receive 0 10.100.33.96 Up
receive 1 10.101.33.96 Up
Group Information
Name Target Status Role Mode Options
sync_group_1.r96 InServ1 Started Primary-Rev Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 375 localvv.0 413 Syncing (20%) Thu Dec 14 17:58:25 PST 2006
remotevv.1 376 localvv.1 414 Syncing (25%) Thu Dec 14 17:58:25 PST 2006
Name Target Status Role Mode Options
sync_group_2 InServ1 Stopped Primary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 385 remotevv.0 423 Stopped Thu Dec 14 17:51:48 PST 2006
localvv.1 386 remotevv.1 424 Stopped Thu Dec 14 17:51:44 PST 2006