HP 3PAR Remote Copy Software - Manual (Page 232)

C.14 Bidirectional Synchronous Disaster Recovery Example
Remote Copy User’s Guide InForm OS Version 2.3.1
8 Issue the showrcopy command to verify that the direction of InServ1 has been restored
and group sync_group_1 displays as Primary, as shown in bold in the following example:
On InServ1:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
InServ2 9 IP ready mirror_config
Link Information
Target Node Address Status Options
InServ2 0 10.100.33.11 Up
InServ2 1 10.101.33.11 Up
receive 0 10.100.33.11 Up
receive 1 10.101.33.11 Up
Group Information
Name Target Status Role Mode Options
sync_group_1 InServ2 Started Primary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 413 remotevv.0 375 Synced Thu Dec 14 18:01:13 PST 2006
localvv.1 414 remotevv.1 376 Synced Thu Dec 14 18:01:13 PST 2006
Name Target Status Role Mode Options
sync_group_2.r11 InServ2 Stopped Secondary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 423 localvv.0 385 Stopped Thu Dec 14 17:51:49 PST 2006
remotevv.1 424 localvv.1 386 Stopped Thu Dec 14 17:51:44 PST 2006