HP Designjet Z3100 Photo Printer series - Manual (Page 164)

8. Lower the blue lever.
9. Close transparent window.
10. Switch on the printer.
11. Reload the roll, or load a new sheet. See Load a roll into the printer on page 29 or Load a single
sheet on page 34 .
NOTE: If you find that there is still some paper causing an obstruction within the printer, restart
the procedure and carefully remove all pieces of paper.
Prints do not fall nicely into the basket
● Ensure the basket is correctly installed.
● Ensure the basket is open.
● Ensure the basket not full.
● Paper often tends to curl near the end of a roll, which can cause output problems. Load a new roll,
or remove prints manually as they are completed.
154 Chapter 12 Troubleshooting paper issues ENWW
Paper issu
es