HP Designjet Z3100 Photo Printer series - Manual (Page 61)

● On the Embedded Web Server's Submit Job page: select Advanced settings >
Resizing.
● The Standard and Custom options adjust the image size to the standard or custom paper
size you have selected. For example, if you have selected ISO A2 as the paper size and you
print an A3-sized image, it is enlarged to fit the A2 paper. If the ISO A4 paper size is selected,
the printer reduces a larger image to fit the A4 size.
● The % of actual size option enlarges the printable area of the original paper size (the page
minus the margins) by the percentage indicated, then adds the margins to create the output
paper size.
●
Using the front panel: select the Setup menu icon , then Printing preferences >
Paper > Resize.
If you are printing to a single sheet, you must ensure that the image can actually fit onto the sheet, otherwise
the image will be clipped.
Change the treatment of overlapping lines
NOTE: This topic applies only when printing an HP-GL/2 job.
The merge option controls the overlapping lines in an image. There are two settings:
● Off: where the lines cross, only the color of the top line is printed.
● On: where the lines cross, the colors of the two lines merge.
To turn merge on, go to the front panel and select the Setup menu icon , then Printing
preferences > HP-GL/2 > Enable merge. You can set the merge option from your software in some
applications. Settings in your software override the front-panel settings.
Preview a print
Previewing a print on the screen allows you to check the layout of the print before printing, which may
help you to avoid wasting paper and ink on a bad print.
● To preview a print under Windows, you have the following options:
● Use your application's print preview option.
ENWW Change the treatment of overlapping lines 51
Printing