HP LaserJet Enterprise 500 Color MFP M575 - Manual (Page 37)

Connect the product to a network by using a
network cable and install the software (Mac OS X)
Configure the IP address
1. Make sure the product is turned on and that the Ready message displays on the product control-
panel display.
2. Connect the network cable to the product and to the network.
3. Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
ENWW Connect the product to a network by using a network cable and install the software (Mac OS X) 21