HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 25)

Command line 25
Item Description
Examples:
->add profile MyNewProfile
Creates a new profile and adds it to the domain, using default connections
->add profile MyNewProfile2 -NoDefaultEnetConn
Creates a new profile without adding default Ethernet connections
->add profile MyNewProfile2 -NoDefaultFcConn
Creates a new profile without adding default FC connections
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn
Creates a new profile without adding default Ethernet and FC connections
Item Description
assign profile Assign a server profile to a device bay
Syntax
assign profile <ProfileName> <DeviceBay>
Parameters:
ProfileName The unique name of the server profile to assign
DeviceBay The device bay to assign the profile to, in the format:
EnclosureID:DeviceBayNumber
If EnclosureID is not specified it defaults to the local enclosure
Example
->assign profile MyProfile1 enc0:1
Assigns a profile to device bay 1 of the primary enclosure
Item Description
remove profile Remove one or more server profiles from the domain
Syntax remove profile <ProfileName | *>
Examples:
->remove profile MyProfile
Removes a server profile by name
->remove profile *
Removes all server profiles
Item Description
set profile Modify properties of an existing server profile
Syntax set profile <ProfileName> Name=<NewName>
Parameters:
ProfileName The current name of the profile to modify
Properties:
Name
The new name of the server profile
Example ->set profile MyProfile Name=MyNewProfileName
Changes the name of a server profile