HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 30)

Command line 30
Item Description
->add uplinkport enc0:1:1 Network=MyNetwork
Adds a new uplink port (Bay 1, Port 1) to a network
->add uplinkport enc0:2:4 Network=MyNetwork Speed=1Gb
Adds a new uplink port (Bay 2, Port 4) to a network and sets the port speed
->add uplinkport enc0:2:3 UplinkSet=MyUplinkSet
Adds a new uplink port (Bay 2, Port 3) to a shared uplink port set
Item Description
remove uplinkport
Remove an uplink port element from a network or a shared uplink port set
Syntax remove uplinkport <PortID> [Network=<NetworkName> |
UplinkSet=<UplinkSetName>]
Parameters:
PortID The name of the port to remove from a network. (required). The port name must be in
the following format:
<EnclosureID>:<InterconnectBayNumber>:<PortNumber>
If EnclosureID is not specified, it defaults to the local enclosure.
Network The name of the network from which the port is removed
UplinkSet The name of the shared uplink port set from which the port is removed
Examples:
->remove uplinkport enc0:1:2 Network=MyNetwork
Removes a specific uplink port (Bay 1, Port 2) from a network
->remove uplinkport * Network=BlueNetwork
Removes all uplink ports from a network named "BlueNetwork"
->remove uplinkport enc0:2:3 UplinkSet=SharedUplinkSet1
Removes a specific uplink port (Bay 2, Port 3) from a shared uplink set
Item Description
set uplinkport Modify an uplink port that exists as a member of a network or shared uplink port set
Syntax set uplinkport <PortID> [Network=<NetworkName> |
UplinkSet=<UplinkSetName>]
Speed=<Auto|10Mb|100Mb|1Gb|Disabled>
Parameters:
PortID The name of the port to modify (required). The specified port must already be added
to a network or uplink port set. The port name is in the format:
<EnclosureID>:<BayNumber>:<PortNumber>
Properties:
Network The name of the network to which the port belongs
UplinkSet The name of the shared uplink port set to which the port belongs
Speed Specifies the port speed for the port. Acceptable values include Auto, 10Mb,
100Mb, 1Gb, and Disabled.
Examples:
->set uplinkport enc0:1:2 Network=MyNetwork Speed=1Gb
Changes the port speed of a network port