HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 13)

Command line 13
Item Description
Syntax
import enclosure UserName=<username> Password=<password>
The password field is optional on the command line. If not specified on the
command line, the user is prompted for the same interactively.
Properties:
UserName A valid user name of the Onboard Administrator user
Password A valid password of the Onboard Administrator user
Example
->import enclosure UserName=Administrator
Password=fgg7h*1
Imports the local enclosure
Item Description
show enclosure Display all enclosures in the domain
Syntax show enclosure [<EnclosureID>|*]
Parameters:
EnclosureID
The ID of an enclosure in the domain
Examples:
->show enclosure
Displays a summary listing of all enclosures
->show enclosure *
Displays detailed information for all enclosures
->show enclosure enc0
Displays detailed information for a specific enclosure
enet-connection
Manage Ethernet network connections.
Supported actions:
add, help, remove, set
Item Description
add enet-connection
Add a new Ethernet network connection to an existing server profile
Syntax
add enet-connection <ProfileName>
[Network=<NetworkName>]
[PXE=<enabled|disabled|UseBios>] [AddressType=<Vc-
Defined|Factory-Default|User-Defined>]
[EthernetMAC=<MAC Address> iScsiMAC=<MAC Address>]
Parameters:
ProfileName The name of an existing profile to which the new connection is added.
(required)
Properties:
Network The name of an existing network to associate with the connection. If the
network name is not specified, or is set to "unassigned," then the
network remains unassigned. (optional)