HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 29)

Command line 29
status
View overall domain status information.
Supported actions:
help, show
Item Description
show status Display the status of the domain and all components in the domain
Syntax show status
Example
->show status
Displays domain status information
systemlog
View Virtual Connect Manager system event log.
Supported actions:
help, show
Item Description
show systemlog Display the Virtual Connect manager system log
Syntax show systemlog
Example
->show systemlog
Displays the system log
uplinkport
Manage interconnect module uplink ports.
Supported actions:
add, help, remove, set, show
Item Description
add uplinkport Add a new uplink port to an existing network or a shared uplink port set
Syntax add uplinkport <PortID> [Network=<NetworkName> |
UplinkSet=<UplinkSet>] [Speed=<Auto|10Mb|100Mb|1Gb|Disabled>]
Parameters:
PortID The ID of an uplink port to add (required). The name is actually a combination of the
enclosure name, interconnect bay, and port number in a single descriptor. The
format of the port name is
"
<EnclosureID>:<InterconnectBay>:<PortNumber>
". If Enclosure ID is not
specified, it defaults to the local enclosure.
Properties:
Network The name of an existing network to which the port is added
UplinkSet The name of an existing shared uplink port set to which the port is added
Speed
Specifies the port speed for the port (optional). Acceptable values include Auto,
10Mb, 100Mb, 1Gb, and Disabled. If not specified, the default port speed is
"Auto".
Examples: