Installing and configuring for red hat 5 – HP EVA P6000 Storage User Manual
Page 111
Advertising
Figure 52 Target login
5.
Click the Connected Targets tab, and then click the Toggle Start-Up button on each target
listed so the targets start automatically (
).
Figure 53 Connected Targets tab
Installing and configuring for Red Hat 5
To install and configure for Red Hat 5:
NOTE:
The iSCSI driver package is included but is not installed by default. Install the package
iscsi—initiator—utils
during or after operating system installation.
Set up the iSCSI Initiator
111
Advertising