HP EVA P6000 Storage User Manual
Page 183
Table 27 Error Messages (continued)
How to correct
Meaning
Status code value
Report the error to product support.
The operation cannot be performed because
the object does not exist. This can indicate
a user or program error.
27
Target Object Does Not Exist
Verify the hardware connections and
that communication to the device is
successful.
A timeout has occurred in processing the
request.
28
Timeout
Report the error to product support.
This error is no longer supported.
29
Unknown Id
Report the error to product support.
This error is no longer supported.
30
Unknown Parameter Handle
Report the error to product support.
The operation could not be completed
because one or more of the disk media had
an unrecoverable error.
31
Unrecoverable Media Error
Report the error to product support.
This error is no longer supported.
32
Invalid State
Verify the hardware connections,
communication to the device, and that
A SCMI transport error has occurred.
33
Transport Error
the management software is operating
successfully.
Resolve the condition and retry the
request. Report the error to product
support.
The operation could not be completed
because the drive volume is in a missing
state.
34
Volume is Missing
Report the error to product support.
The supplied cursor or sequence number is
invalid. This may indicate a user or program
error.
35
Invalid Cursor
Report the error to product support.
The specified target virtual disk already has
an existing data sharing relationship. This
can indicate a user or program error.
36
Invalid Target for the Operation
No action required.
There are no more events to retrieve. (This
message is informational only.)
37
No More Events
Retry the request at a later time.
The command lock is busy and being held
by another process.
38
Lock Busy
Report the error to product support.
The storage system time is not set. The
storage system time is set automatically by
the management software.
39
Time Not Set
Report the error to product support.
The requested operation is not supported by
this firmware version. This can indicate a
user or program error.
40
Not a Supported Version
Report the error to product support.
This is an internal error.
41
No Logical Disk for Vdisk
Delete the associated presentation(s)
and retry the request.
The virtual disk specified is already
presented to the client and the requested
operation is not allowed.
42
Virtual disk Presented
Report the error to product support.
The request is not allowed on the slave
controller. This can indicate a user or
program error.
43
Operation Denied On Slave
Report the error to product support.
This error is no longer supported.
44
Not licensed for data replication
183