HP NonStop G-Series - Manual (Page 193)

SCSI ID
An identification number assigned to the device when configured.
8: SCSI-to-Fiber extender / SCSI to Fiber Converter
9: Fiber-to-SCSI extender
SCSI Controller
The number that identifies the SCSI controller that manages the storage router.
If this attribute is missing, it is because the SCSI Controller has been removed
from the system.
Example: SSAC (1.1.50.3)
Actions
Responsive Test
Verifies that the resource is configured and responding.
Switch Process Pair
Switches processors of the primary and backup tape I/O processes
SWAN / SWAN2
Attributes
Actions
The ServerNet wide area network (SWAN) concentrator CRU is an external communications device
that connects to a system through dual Ethernet ports. It supports both synchronous and
asynchronous protocols over a variety of electrical interfaces. The SWAN CRU object displayed by
OSM can be either a SWAN or SWAN 2 CRU. To distinguish between them, look at their
subcomponents.
Each SWAN CRU contains up to three CLIP s, each of which contains two SWAN Paths and two
WAN Lines , giving each SWAN CRU as many as six WAN ports.
Each SWAN 2 CRU contains these subcomponents:
Up to six SWAN 2 CLIP s, each of which contains two SWAN Paths and two WAN Lines,
giving each SWAN 2 CRU as many as twelve WAN ports
●
Two LAN Logic Board CRU s ●
Two Fan CRU s ●
Two Power Supply CRU s ●
One Battery ●
Location in OSM Tree: System > SWAN Collection > SWAN [or SWAN2]