HP Deskjet 6540 Color Inkjet Printer - Manual (Page 71)

Printing
1. If necessary, open the Page Setup dialog box and set the paper size, scaling,
or orientation options.
2. Open the Print dialog box.
3. Select the Paper Type/Quality panel, and then specify the following settings:
• Source: Upper tray
• Paper Type: Automatic or the appropriate greeting card paper type
• Quality: Normal, Best, or Maximum dpi.
4. Select any other print settings that you want, and then click Print.
9.8 Transparencies (HP Deskjet 6540-50 series)
Guidelines
• For great results, use HP Premium Inkjet Transparency Film.
• Do not exceed the In-tray capacity: up to 30 transparencies.
Preparing to print
1. Verify that the printer is turned on.
2. Raise the Out tray, and then remove all paper from the In tray.
3. Slide the paper-width guide all the way to the left, then pull out the paper-length
guide.
4. Place the transparencies in the In tray, with the side to printed on facing down
and the adhesive strip facing up and toward the printer.
5. Carefully push the transparencies into the printer until they stop so that none
of the adhesive strips catch on one another.
6. Slide the paper guides firmly against the paper.
7. Lower the Out tray.
HP Deskjet 6500 series printers User's Guide
71