HP Deskjet 6540 Color Inkjet Printer - Manual (Page 89)

Preparing to print
1. Verify that the printer is turned on.
2. Raise the Out tray, then remove all paper from the In tray.
3. Slide the paper-width guide all the way to the left, then pull out the paper-length
guide.
4. Place the cards, with the printable sides down and the short sides pointing
towards the printer, in the right side of the In tray. Push the cards into the printer
until they stop.
5. Slide the paper guides firmly against the cards.
6. Lower the Out tray.
Printing
1. Open the Page Setup dialog box, and then select the following settings:
• Paper Size: The appropriate paper size
Note: To print a borderless card, click the borderless photo size that
matches the card size.
• Orientation: The appropriate orientation
2. Click OK.
3. Open the
Print dialog box.
4. Select the Paper Type/Quality panel, and then select the following settings:
• Source: Upper tray
• Paper Type: Automatic or the appropriate paper type
• Quality: Normal, Best, or Maximum dpi
5. If you want to use them, set the HP digital photography options .
6. Select any other print settings that you want, and then click Print.
Note: If an out-of-paper message appears, verify that the cards are
positioned properly in the paper tray.
HP Deskjet 6500 series printers User's Guide
89