Product information – HP Z400 Workstation User Manual
Page 10
Product information
Table 1-1
Product information
Topic
Location
HP Cool Tools
Most HP Microsoft Windows workstations are preloaded
with additional software that is not automatically installed
during first boot. Additionally, a number of valuable tools
on your workstation are preinstalled that may enhance
system performance. To access or learn more about these
applications, choose one of the following options:
●
Click the HP Cool Tools icon on the desktop, or
●
Open the HP Cool Tools folder by selecting Start >
All Programs > HP Cool Tools.
To learn more about these applications, click HP Cool
Tools—Learn More.
To install or launch the applications, click the appropriate
application icon.
Regulatory information
Refer to the Safety & Regulatory Information guide for
product Class information. You can also refer to the label
on the workstation chassis.
Accessories
For complete and current information on supported
accessories and components, see
System board
A diagram of the system board is located on the inside of
the side access panel. Also, additional information is
located in the Maintenance and Service Guide on the Web
at
Serial number and Certificate of
Authenticity (COA) labels (if
applicable)
Serial number labels are on the top panel, or on the side
of the unit at the rear, depending on the workstation
model. The COA label is generally located on the top or
side panel near the serial number label. Some
workstations have this label on the bottom of the unit.
Linux
For information on running Linux on HP workstations, see
.
2
Chapter 1 Locating HP resources
ENWW