Verifying hardware compatibility, Setting up novell sled, Updating the workstation – HP Z400 Workstation User Manual
Page 42: Updating the workstation after first boot, Upgrading the bios, Setting up novell sled updating the workstation
Installing and customizing Red Hat-enabled workstations
Linux-enabled workstations require the HP Installer Kit and the purchase of a Red Hat Enterprise
Linux box set. The Installer kit includes the HP CDs necessary to complete the installation of all
versions of the Red Hat Enterprise Linux box set that have been qualified to work on an HP
workstation.
To use the drivers in the HP Installer kit for Linux other than RHEL, you must manually extract the
drivers from the HP Driver CD and install them. HP does not test the installation of these drivers on
other Linux distributions nor does HP support this operation.
Verifying hardware compatibility
To see which Linux versions have been qualified to work on HP Workstations visit
Setting up Novell SLED
To set up the SUSE Linux Enterprise Desktop (SLED) on systems preloaded with the operating
system:
1.
Boot the workstation.
2.
Start the Installation Settings and enter the password, network, graphics, time, keyboard
settings, and Novell Customer Center Configuration for the workstation.
NOTE:
During Installation Settings after the first time after booting the system the Novell
subscription can be activated from the Novell Customer Center Configuration screen. Visit the
full Novell Customer Center documentation at
.
Updating the workstation
HP is constantly working on improving your total workstation experience. To ensure that the
workstation leverages the latest enhancements, HP recommends that you install the latest BIOS,
driver, and software updates on a regular basis.
Updating the workstation after first boot
After successfully booting the workstation for the first time, you should follow these guidelines to
ensure that the workstation is up-to-date:
●
Ensure that you have the latest system BIOS loaded. See
instructions.
●
Ensure that you have the latest drivers for your system. See
for instructions.
●
Become familiar with your available HP resources.
●
Consider a subscription to Driver Alerts at
.
Upgrading the BIOS
For optimum performance, determine the BIOS revision on the workstation, and upgrade it if
necessary.
34
Chapter 4 Setting up the operating system
ENWW