HP Business Inkjet 1000 Printer - Manual (Page 26)

U
sing the pr
in
te
r
Performing printer tasks 23
Performing automatic duplexing
When printing is complete on one side of the paper, the printer holds the paper and pauses while the ink
dries. Once the ink is dry, the paper is pulled back into the printer and the second side of the paper is
printed. When printing is complete, the paper is dropped on to the output tray.
For more information on setting print options, see Changing printer settings .
To perform automatic duplexing (Windows)
1. Load the appropriate paper in Tray 1.
2. On the File menu, click Print, and then click Properties. (The actual steps can vary; this is the most
common method.)
3. On the Finishing tab, select the Print on Both Sides check box. Make sure that the Automatic check box
is selected.
4. When duplexing, the top margin might need to be increased slightly to make sure the pages align.
Select the Preserve Layout check box to reduce the margins so that the page prints on a single sheet.
Clear this check box if you prefer that the page print on more than one sheet with full margins.
5. Select or clear the Flip Pages Up check box depending on which way you want the binding. See the
graphics in the printer driver for examples.
6. Click OK to close the dialog box.
7. Click OK to print.
To perform automatic duplexing (Mac OS)
1. Load the appropriate paper in Tray 1.
2. On the File menu, click Print.
3. On the Two Sided Printing panel, select the Print Both Sides check box, the binding orientation you
want (select the desired icon).
4. On the Paper Type/Quality panel, select Automatic from the Source drop-down menu.
5. Click Print to print the document.