HP Storage Mirroring Software - Manual (Page 52)

50 of 118
To edit data views:
1. Click Data Views icon. The Data View Editor appears.
2. Specify the Data Views Editor fields that apply to your report.
●
Number of data views—The number of data views to plot. If the fields being
plotted have two different units, then the chart requires two data views. When
two views are present the settings for the second view are enabled.
●
Y-axis label—The title for y axis.
●
Use range—Use range sets the upper and lower limits for the y axis. Select
this checkbox to enable the Lower limit and Upper limit fields.
●
Lower limit—Sets the lower limit for the y axis when range is enabled.
●
Upper limit—Sets the upper limit for the y axis when range is enabled.
●
Use logarithmic scale—If selected, the y axis is scaled logarithmically.
●
Unit—The base unit for the y axis.