HP Deskjet D1550 Printer - Manual (Page 100)

Paper is not picked up from the input tray
Solution:
Do one of the following:
•
If the product is out of paper or there are only a few sheets remaining, load more
paper in the input tray.
• If there is paper in the input tray:
•
Remove the stack of paper from the input tray and verify that all the paper in
the input tray is the same size and type.
• Replace any paper that is ripped, dusty, wrinkled, or bent.
If the paper is curled, uncurl the paper by gently bending it in the opposite
direction of the curl or replace the paper.
• Tap the stack of paper on a flat surface to align the edges.
• Verify that the stack of paper contains between 10 and 25 sheets of paper.
• Reload the paper into the input tray.
Follow the prompts on the display to continue.
Cause: There was not enough paper in the input tray.
The text edges are jagged
Try the following solutions if the text in your printouts is not sharp and the edges are
rough.
Solution: Use TrueType or OpenType fonts to ensure that the product is able to
print smooth fonts. When selecting a font, look for the TrueType or OpenType icon.
Some software applications offer custom fonts that have jagged edges when enlarged
or printed. Also, if you want to print bitmapped text, it might have jagged edges when
enlarged or printed.
Cause: The font was a custom size.
Document is misprinted
• Text and images are misaligned
• Document is printed off-center or at an angle
• Parts of the document are missing or printed in the wrong place
• Envelope is printed at an angle
• Document does not reflect the new print settings
Text and images are misaligned
If the text and images on your printouts are misaligned, then align the print cartridges.
For more information on aligning print cartridges, see
Align the print cartridges .
Document is misprinted 97
Trou
bles
ho
ot
ing