Out of paper, There was an error writing to usb port, Installation problems – HP Deskjet D1550 Printer User Manual

Page 65

Advertising
background image

6. Click Cancel on the Print dialog box.
7. Print the envelope using the Envelopes and Labels feature in Microsoft Word. The

envelope should print without any errors.

NOTE:

When you are finished printing envelopes, set the paper size back to

the default print settings.

Out of paper

If you receive an out of paper message, follow the guidelines in

Out of paper

.

There was an error writing to USB port

The printer might not be receiving correct data from another USB device or USB hub.
Connect the printer directly to the USB port on the computer.

Two-way communication cannot be established or Printer not responding

The printer might not be able to communicate with the computer if the USB cable is too
long.
If you receive this error message, make sure that the USB cable is not greater than 3
meters (approximately 9.8 feet) in length.

NOTE:

For best printing performance, use a USB 2.0 compatible cable.

Installation problems

If the software installation program stops or fails, check the following topics for more
information:

Installation program stops

"Unknown Device" message displays

Printer name does not appear

If you continue to have problems, visit HP Technical Support at

www.hp.com/support

.

Installation program stops

Cause: If the installation program stops when it looks for new hardware, one of the
following issues is causing a communication problem:

The USB cable is old or defective.

Software, such as an antivirus program, is running.

Another device, such as a scanner, is connected to the computer.

Chapter 11

62

Troubleshooting

T

roub
les
hoot

ing

Advertising