HP 3PAR System Reporter Software - Manual (Page 208)

8.16 Report Options
3PAR System Reporter User’s Guide System Reporter 2.8
8.4.13 timeform
Use the timeform option to specify a time format (either relative or absolute ) when
using a report that requires a time range. This option can only be specified once in a given
query string.
8.4.13.1 values:
Specify one of the following:
relative
Times used in the table(s) and/or chart(s) will be expressed relative to the present and
expressed as using the format
<xx>d <hh>:<mm>:<ss> , where this string expresses the number of days, hours, minutes
and seconds ago.
absolute
(Default). Times used in the table(s) and/or chart(s) will be expressed in the following
format: yyyy/mm/dd hh:mm:ss .
full
The times used in the table(s) and/or chart(s) will be expressed in the following format:
yyy/mm/dd hh:mm:ss.
auto
The times used in the table(s) and/or chart(s) will be expressed depending on the resolution
that is selected.
8.4.13.2 example:
The following example specifies that the time formats should be expressed in terms relative to
the present point in time:
8.4.14 begintsecs
Use the begintsecs option to specify a start time when using a report that requires a time
range, or to indicate a specific point in time when using other report types.
&timeform=relative