Duplexer specifications – HP Deskjet 6988dt Printer User Manual
Page 134
Only one side of the page prints when the two-sided printing option is enabled
Verify that the following conditions exist:
●
The
are set in both the printer software and the software
program that you are using.
●
The photo paper is not curled, if you are printing on two-sided photo paper. Photo
paper should be flat before printing. See
storing and handling photo paper
for more
information.
●
The media type and size that is selected on the Paper/Quality tab are supported
by the
.
Note
Do not try to print a two-sided document on single-sided paper, such
as single-sided photo paper.
Binding margin is in the wrong place
You might have chosen an incorrect paper orientation.
1.
Open the
dialog box.
2.
Select the Two-Sided Printing pane.
3.
Verify that the correct binding has been selected:
–
The Book button is selected for binding along the side.
–
The Tablet button is selected for binding along the top.
Automatic Two-Sided Printing Accessory specifications
Dimensions when attached to printer
124.6 mm (4.9 in) tall x 320.5 mm (12.62 in) wide x 77.7 mm (3.06 in) deep
Skew (second side of printed page)
Plain paper: +/- .009 mm/mm (.009 in/in)
Cards: +/- .006 mm/mm (.006 in/in)
Envelopes: +/- .012 mm/mm (.012 in/in)
Media weight
Letter/A4: 60 to 90 g/m
2
(16 to 24 lb)
Cards: Up to 200 g/m
2
(110 lb index max)
Specialty paper: Up to 160 g/m
2
(44 lb bond)
Media sizes
Size range: 81 x 117 mm to 216 x 297 mm (3.2 x 4.6 in to 8.5 x 11 in)
Paper:
●
U.S. Letter: 216 x 279 (8.5 x 11 in)
●
Executive: 184 x 267 mm (7.25 x 10.5 in)
●
A4: 210 x 297 mm
Chapter 12
132
HP Deskjet 6980 series