HP Deskjet 6988dt Printer - Manual (Page 43)

Parameter Description
Device Address The hardware address of the Bluetooth device.
Note You cannot change this address.
If the Bluetooth device is not plugged into the printer, the
message There is no Bluetooth Device present is
displayed.
Device Name The device name assigned to the printer so that other
Bluetooth devices can identify it.
Passkey A value that the user must enter in order to print using
Bluetooth.
Visibility Shows whether or not the printer is visible to other Bluetooth
devices that are within range.
●
Visible to all: Any Bluetooth device within range can
print to the printer.
● Not visible: Only Bluetooth devices that have stored
the device address of the printer can print to it.
Security The level of security set for the printer connected by
Bluetooth.
●
High: The printer requires a passkey from the
Bluetooth device before allowing the device to send a
print job to it.
● Low: The printer does not require a passkey. Any
Bluetooth device within range can print to it.
Tray Select Note If the optional 250-Sheet Plain Paper Tray
Accessory is not installed, the Tray Select options will not
appear.
● Upper Tray: Selects the upper tray as the paper
source.
● Lower Tray: Selects the lower tray as the paper
source.
Reset Bluetooth Resets the printer's Bluetooth settings to the factory default
settings.
●
Yes, reset Bluetooth: Resets Bluetooth to factory
default settings.
● No: Settings remain as they are.
Reset the printer to the factory default settings
After the printer is configured for a network, its configuration settings are saved in its
memory.
Resetting the printer to its factory default settings will clear all the settings from the
printer's memory for the network. This should only be done as a last resort when
troubleshooting the printer.
User's guide 41