Estimate of time required for exporting files, Termination codes that the export tool returns – HP XP Array Manager Software User Manual
Page 127
statistics spanning 24 hours, you could run the Export Tool eight times; each time you run the Export
Tool, the tool should export statistics spanning three hours.
Table 26 Estimate of Time Required for Exporting Files
Remarks
Estimated Time
Operand for
the Group Sub-
command
This estimate assumes that the Export Tool should save statistics about
128 ports within a 24-hour period.
5 minutes
Port
This estimate assumes that the Export Tool should save statistics about
128 ports within a 24-hour period.
5 minutes
PortWWN
This estimate assumes:
•
There are eight XP Performance Control groups, and eight WWNs
are registered on each XP Performance Control group.
•
There is a WWN that is not registered on any XP Performance
Control group.
•
The Export Tool should save statistics about XP Performance Control
groups and WWNs described above within a 24-hour period.
5 minutes
PPCG
This estimate assumes:
•
The Export Tool should save statistics about 8,192 volumes within
a 24-hour period.
•
The Export Tool is used eight times. Each time the Export Tool is
used, the tool obtains statistics within a 3-hour period.
60 minutes
LDEV
This estimate assumes:
•
The Export Tool should save statistics about 12,288 LUs within a
24-hour period.
•
The Export Tool is used eight times. Each time the Export Tool is
used, the tool obtains statistics within a 3-hour period.
60 minutes
LU
Whenever the Export Tool runs, the Export Tool creates a new log file on your computer. Therefore,
if you run the Export Tool repeatedly, the size of free space on your computer will be reduced. To
secure free space on your computer, you are strongly recommended to delete log files regularly. For
information about the directory containing log files, see “
Java Command for Exporting Data In
For information about how to solve errors with the Export Tool, see “
The Export Tool returns a termination code when the Export Tool finishes.
Table 27 Termination Codes that the Export Tool Returns
Meaning
Termination
Code
The Export Tool finished successfully.
0
An error occurred when the set command (see “
” on page 154) executed,
because an attempt to switch to Modify mode failed. Some other user might have been
logged on in Modify mode.
1
XP24000/XP20000 Performance Monitor User Guide
127