HP XP Array Manager Software User Manual
Page 144
Description
Operand
Use this operand when you want to export statistics about remote copy operations
which are displayed in the Continuous Access Monitor window and the TC MF
Monitor window. By using this operand, you can export monitoring data about
remote copy operations performed by XP Continuous Access and TrueCopy for
Mainframe at each LU path. When statistics are exported to a ZIP file, the file name
will be RCLU_dat.ZIP. For details on the statistics exported by this operand, see
When you specify variables port-name.host-group-id, you can narrow the range
of LU paths whose monitoring data are to be exported. port-name is a port name.
host-group-id is the ID of a host group. The host group ID must be a hexadecimal
numeral. The colon (:) indicates a range. For example, CL1-C.01:CL1-C.03
indicates the range from the host group #01 of the CL1-C port to the host group
#03 of the CL1-C port.
Ensure that the value on the left of the colon is smaller than the value on the right
of the colon. Note that the smallest port-name value is CL1-A and the largest
port-name value is CL4-r. The following formula illustrates which port-name value
is smaller than which port-name value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b < … < CL4-a
< … < CL4-r
For example, you can specify RCLU CL1-C.01:CL2-A.01, but you cannot
specify RCLU CL2-A.01:CL1-C.01. Also, you can specify
RCLU CL1-C.01:CL1-C.03
, but you cannot specify
RCLU CL1-C.03:CL1-C.01
.
If port-name.host-group-id is not specified, the monitoring data of all the LU paths
will be exported.
RCLU
[[port-
name.host-group-id]:[port-
name.host-group-
id]][
…]
Use this operand when you want to export statistics about remote copy operations
which are displayed in the Continuous Access Monitor window and the TC MF
Monitor window. By using this operand, you can export monitoring data about
remote copy operations performed by XP Continuous Access and TrueCopy for
Mainframe at volumes controlled by each CU. When statistics are exported to a
ZIP file, multiple ZIP files whose names are beginning with RCLDEV_ will be output.
For details on the statistics exported by this operand, see
When you specify variables LDKC-CU-id, you can narrow the range of LDKC:CUs
that control the volumes whose monitoring data are to be exported. LDKC-CU-id
is an ID of an LDKC:CU. The colon (:) indicates a range. For example, 000:105
indicates LDKC:CUs from 00:00 to 01:05.
Ensure that the LDKC-CU-id value on the left of the colon is smaller than the
LDKC-CU-id value on the right of the colon. For example, you can specify RCLDEV
105:000
.
If LDKC-CU-id is not specified, the monitoring data of all the volumes will be
exported.
RCLDEV
[[LDKC-CU-
id]:[LDKC-CU-
id]][
…]|
Using the Export Tool
144