HP XP Array Manager Software - Manual (Page 131)

svpip Subcommand
Syntax
svpip {ip-address|host-name}
Description
The svpip command specifies the IP address or the host name of the SVP.
Operands
Description Operand
Specifies the IP address of the SVP.
If the SVP is managed with IPv6 (Internet Protocol Version 6), you must specify the
ip-address operand to match the format of IPv6. If the export tool is running on Windows
XP, the interface identifier %5 must be added to the end of the specified IP address.
ip-address
Specifies the host name of the SVP.
If the host name includes any character that is neither an alphanumeric nor a period,
the host name must be enclosed by double quotation marks (").
host-name
Example
The following example specifies the IP address of the SVP as 158.214.127.170.
svpip 158.214.127.170
retry Subcommand
Syntax
retry [time=m] [count=n]
Description
The retry command makes settings on retries of export processing.
When an internal error occurs during export processing, the Export Tool stops processing and then
retries export processing. By default, the Export Tool can retry processing up to three times, but you
can change the maximum number of retries by using the retry command.
By default, the interval between one retry and the next retry is two minutes. You can change the
interval by using the retry command.
The retry command must execute before the login command executes.
XP24000/XP20000 Performance Monitor User Guide 131