HP XP Performance Advisor Software - Manual (Page 23)

Disk controller history script (DKCH)
The report CLUI application provides a script that displays Disk Controller History data. The -dkc switch is
a required element. Optionally, you can specify a management station by using ms <URL>, and specify
a username and password pair by using auth <user:passwd>.
DKCH usage
Following is the general format of the command to invoke the script:
dkch [-d<delim>] [-L] [-hr] [-ms<URL>] [-auth <user:passwd>] -dkc <serial
#> [-st <start time> -et <end time>] [-?]
where:
–d<delim> An optional parameter used to specify delimited output data. There is no space
between d and the delimiter character.
–L An optional parameter used to specify labeled and delimited output data.
–hr An optional parameter used to request the data in a human-readable format.
<serial#> The array serial number.
–ms <URL> The address of a management station in the form http://path.to.managementstation/
.
–-auth <user:passwd> A username and password pair in the form username:password.
<start time> The start time in the form mm.dd.yyyy hh:mm:ss.
<end time> The end time in the form mm.dd.yyyy hh:mm:ss.
–? Prints the usage statement.
If no start and end time are specified, only the most recent 10 records are retrieved from the management
station.
DKCH sample output
The following are output data samples for the CLUI shell script described in the previous section:
NOTE:
Labels in labeled outputs (specified by –hr or –L in the command line) are in bold.
HP StorageWorks Performance Advisor XP Software command-line user interface user guide 23