HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 112)

112 2 - C ONFIGURING THE HP EFS WAN A CCELERATOR
Setting the
Monitor
Password
You can set the monitor user password in the Setup: Authentication - Account: Monitor
page. A monitor user can view HP EFS WAN Accelerator reports and system logs; a
monitor user cannot make configuration changes to the HP EFS WAN Accelerator.
The password must have a minimum of 6 characters.
To set the monitor
password 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Authentication in the left menu to display the Setup: Authentication -
General Settings page.
3. Click Account: Monitor in the left menu to display the Setup: Authentication -
Account: Monitor page.
Figure 2-49. Setup: Authentication - Account: Monitor Page
4. Under Change Password, type the new monitor password in the New Password
text box. The password must have a minimum of 6 characters.
5. Retype the new monitor password in the Confirm New Password text box.
6. Click Change Password to apply your settings to the running configuration.
7. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
Setting RADIUS
Servers
Optionally, you can configure RADIUS authentication in the Setup: Authentication -
RADIUS Servers page. RADIUS is an access control protocol that uses a challenge
and response method for authenticating users.