HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 126)

126 2 - C ONFIGURING THE HP EFS WAN A CCELERATOR
‹ Type the desired time in the Time text box. Use the following format:
HH:MM:SS.
NOTE: If you specify a URL in the URL text box, the image is uploaded, installed, and the
appliance is rebooted at the time you specify. If you specify a file to upload in the Local File text
box, the image is uploaded immediately, however the image is installed and the appliance is
rebooted at the time you specify.
5. Click Install Upgrade to install the new version of the software.
You can revert to a previous version of the software. The previous version of the
software is displayed in the Setup: Upgrade Software page.
To revert to a previous
version of the software 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Upgrade Software in the left menu to display the Setup: Upgrade Software
page.
Figure 2-60. Setup: Upgrade Software Page
3. In the Software Upgrade section, click Switch to Backup Version. The previous
version of the software becomes the current, running configuration.
IMPORTANT: You must restart the HP EFS WAN Accelerator service for this configuration
to take effect. For detailed information, see
“Starting and Stopping the HP EFS WAN
Accelerator Service and PFS” on page 127 .