Email setup tab – HP Power Distribution Unit Management Module User Manual
Page 39
HP PDR Management Module web interface 39
2.
Enter the IP address for each SNMP manager in the IP Address field.
NOTE:
SNMP managers cannot communicate with the management module until the IP
address is entered on the SNMP Managers screen.
3.
Enter the Read community string for each SNMP manager.
4.
Enter the Write community string for each SNMP manager.
5.
Configure the access type for each SNMP manager.
o
RO—Read Only
o
RW—Read/Write
6.
Do one of the following:
o
Click Save Settings to save the information.
o
Click Undo Changes to undo the changes.
o
Click Help to view online help.
Email Setup tab
This screen enables administrators to configure email event notifications.
To configure the email notifications:
1.
Enter the mail server IP address in the Email Server Address field.
2.
Enter the email address that messages are marked as being sent from in the From Address field.
3.
Select the Enable Account checkbox and enter up to 10 email addresses in the Email Address field.
The addresses should correspond to the persons who should receive email notifications of events that
occur.
4.
Do one of the following:
o
Click Save Settings to save the information.
o
Click Undo Changes to undo the changes.
o
Click Help to view online help.