HP LaserJet 8000 Multifunction Printer series User Manual
Page 172
Chapter 5
Problem Solving
172
Understanding Printer Messages
FINISHER LOW ON
FINISHING AGENT
The finishing device is running out of its finishing material and
needs to be refilled.
FLASH DEVICE
FAILURE
The flash DIMM had a critical failure and no longer can be used.
Remove the flash DIMM and replace it with a new one.
FLASH FILE
OPERATION FAILED
The requested operation could not be performed. You might have
attempted an illegal operation, such as trying to download a file to a
non-existent directory.
FLASH FILE
SYSTEM IS FULL
Delete files from the flash DIMM. Download or delete files from
HP JetAdmin, and download or delete fonts from HP FontSmart.
(See the software help for more information.)
FLASH IS
WRITE PROTECTED
The flash DIMM is protected, and no new files can be written to it.
Disable the write protection through HP JetAdmin.
INPUT DEVICE
CONDITION xx.yy
An input paper handling device has a condition that needs attention
before printing can resume.
See the documentation that came with the paper handling device for
assistance.
LOADING
PROGRAM <number>
alternates with
DO NOT POWER OFF
Programs and fonts can be stored on the printer’s file system. At
bootup time these entities are loaded into RAM. (These entities can
take a long time to load into RAM depending on the size and number
of entities being loaded.) The
<number>
specifies a sequence number
indicating the current program being loaded.
Printer Messages (continued)
Message
Explanation or Recommended Action