HP XP Continuous Access Software User Manual
Page 232
Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error Contents
Error Code
(SSB2)
Error Code
(SSB1)
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the CLPR number of the
specified volume differed from the CLPR number of the journal group.
A request from XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volumes
belong to the journal group that is contained in the XP Continuous Access
Journal and XP Continuous Access combination (2DC) configuration in
the intermediate site.
E846
An operation request for the journal group, which was used in the system
that consists of a single primary and secondary storage system, was
received. However, the command was rejected because the specified
volume is defined to be used in the system that consists of multiple primary
and secondary storage systems.
E847
An operation request for the journal group, which was used in the system
that consists of multiple primary and secondary storage systems, was
received. However, the command was rejected because the specified
volume is defined to be used in the system that consists of a single primary
and secondary storage system.
E848
The specified consistency group number is already used.
E866
Because the shared memory is not mounted in the specified LDEV number,
it cannot be used as a data volume.
E86E
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the path between the
storage devices for the two way was not defined. Check whether the
bidirectional normal path was defined or not.
E871
A request of XP Continuous Access Journal Paircreate was received.
However, the pair could not be created because the serial number of the
secondary storage system that was specified was incorrect.
E876
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the emulation type was
mixed with the volume of 3390-9A and the volume of 3390-9A in the
specified journal group.
E878
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volume was
different from the LDKC of the specified journal group. A pair in the same
journal group cannot be set across two LDKCs.
E879
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified journal group
was unregistered.
E87B
Journal volume is not registered in the specified journal group.
E87C
A request of XP Continuous Access Journal Pairresync was received.
However, the command was rejected because the specified volume was
not for the XP Continuous Access Journal pair.
E87D
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified P-VOL or
S-VOL was a journal volume.
E87E
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the emulation type was
different between the specified P-VOL or S-VOL and the journal volume.
E880
XP Continuous Access Journal pair cannot be created or resynchronized
because of the power-on processing.
E881
232 Troubleshooting