Using the load pack magazine, Adding a cartridge to a magazine, Removing a cartridge from a magazine – HP StorageWorks ESL9000 Tape Library User Manual
Page 56: 21 inserting a tape cartridge into a magazine, Figure 21
Preparing the Library for Operation
56
HP StorageWorks ESL9000 Series Tape Library User Guide
Using the Load Pack Magazine
Use the load pack to add and remove tape cartridges.
Adding a Cartridge to a Magazine
The 4-cartridge magazines are stationary and built into the load port. Simply place
cartridges into the bins with the bar codes facing out (see
1. Access the load pack magazines by opening the load port (see
on page 54).
2. Insert a tape cartridge into a load pack magazine.
3. Slide the tape cartridge in until you hear it snap into place.
Figure 21: Inserting a tape cartridge into a magazine
Removing a Cartridge from a Magazine
To remove a tape cartridge from a load pack:
1. Push the tape cartridge in until you hear a snap.
2. Eject the tape cartridge.
3. Remove the tape cartridge.
4. Close the load port.