HP BD-2000 Blu-ray Disc Player - Manual (Page 51)

51
S
et
tings and F
ur
ther
Adjustments
your surround receiver or amplifier to set the
appropriate PCM sampling rate:
48K: • This is the default setting. It is best
to retain this setting in the following
conditions:
If the Blu-ray player is not connected to
•
a surround receiver or amplifier.
If the Blu-ray player is connected to a
•
surround receiver or amplifier via HDMI
output.
If you are unsure of the surround
•
receiver or the amplifier’s PCM sampling
rate.
96K: • Select this option if the connected
amplifier or receiver is not capable of
handling 192 kHz signals.
192K:
• Select this option if the connected
amplifier or receiver is capable of handling
192 kHz signals.
Note:
Setting an incorrect PCM sampling rate may
result in unpredictable audio playback.