HP LaserJet Pro CM1415fnw Color Multifunction Printer - Manual (Page 205)

System Settings
The HP ToolboxFX System Settings tab contains links to the following main pages:
● Device Information. View information about the product, such as the product description and a
contact person.
● Paper Setup. Change the product paper-handling settings, such as default paper size and default
paper type.
● Print Quality. Change the product print-quality settings.
● Print Density. Change the print-density settings, such as contrast, highlights, midtones, and
shadows.
● Paper Types. Change the mode settings for each media type, such as letterhead, prepunched, or
glossy paper.
● System Setup. Change the system settings, such as jam recovery and auto-continue. Change the
Cartridge low threshold setting, which sets the toner level that causes a Low toner pop-up alert.
● Device Polling. Change the product polling settings, which determine how often HP ToolboxFX
collects data from the product.
● Save/Restore Settings. Save the current settings for the product to a file on the computer. Use
this file to load the same settings onto another product or to restore these settings to this product
at a later time.
● Product Security. Set, change, or clear the product security password.
Device Information
The Device Information page stores data about your product for future reference. The information that
you type in the fields on this page appears on the Configuration page. You can type any character in
each of these fields.
NOTE: You must click Apply before your changes take effect.
ENWW Use the HP ToolboxFX software 189