HP Integrity Superdome 2 Server - Manual (Page 170)

27 Firmware update commands
For information on online firmware update using the OA GUI, see the HP Integrity Superdome 2
Onboard Administrator User Guide.
UPDATE SHOW
•
Command:
UPDATE SHOW { ALL | BLADE [ ALL | <location> [ { , | - } <location>
] ] | CONFIG | FAN [ ALL | <location> [ { , | - } <location> ] ] |
FIRMWARE | ICBAY [ ALL | <location> [ { , | - } <location> ] ] |
LCD | NPARTITION { nPartition name or number | ALL } | TRAY }
•
Description:
This command will display the firmware version installed on the following FRUs in the enclosure
on which the command is run:
◦ Non-Superdome-blade devices in device bays
◦ Interconnect modules
◦ Fans
◦ Trays (PIC on OA tray)
◦ PIC on GPSM boards
◦ LCDs
The firmware version of the following FRUs will not be displayed using the update show
command.
◦ Superdome 2 blades
◦ XFM
◦ IOX
◦
OA
◦ GPSM
•
Access level/Bay level:
Any
•
Restrictions:
This command must be run on the enclosure containing the component.
•
Example:
Oa_host_name> update show
Device Name Location Version NewVersion
-----------------------------------------------------------------------------------
TRAY | BladeSystem c7000 Onboard Administrator Tray | - | 1.2.0 | 1.2.0
GPSMPWR | GPSM power management device | 1 | 1.2.0 | 1.2.0
GPSMPWR | GPSM power management device | 2 | 1.2.0 | 1.2.0
LCD | BladeSystem c7000 Insight Display | - | 2.2.2 | 2.2.2
BLADE | HP StorageWorks SB40c | 4 | 1.20.0 | 1.20.0
ICBAY | GbE2c Ethernet Blade Switch | 1 | 1.02.0 | 1.02.0
ICBAY | GbE2c Ethernet Blade Switch | 2 | 1.02.0 | 1.02.0
FAN | BladeSystem c-Class fan | 1 | 2.7.4 | 2.7.4
FAN | BladeSystem c-Class fan | 2 | 2.7.4 | 2.7.4
170 Firmware update commands