Alto-Shaam Platinum Series ASC-4G - Manual (Page 18)

Gas Convection Oven - Electronic Control
Pg. 17.
OPERATING INSTRUCTIONS - ELECTRONIC CONTROL
Press MAIN POWER Ƽ “ON.”
•The display ባ will alternate between last Cook Set Temperature and actual Cavity Temperature.
•The oven will preheat to previous Cook temperature, and the Preheat Indicator ቢ will illuminate.
•The fan operates at high speed “FnHi” during preheat.
A. If the previous Cook Cycle is acceptable, proceed to Step B.
B. WHEN THE COOK PREHEAT TEMPERATURE HAS BEEN REACHED:
•The START Key ¹ and READY Indicator ቢ will flash.
•The control will produce an audible beep every 30 seconds.
LOAD PRODUCT IN A TIMELY MANNER.
If cooking by probe, remove probe from its bracket, wipe the probe tip with a disposable alcohol pad and
properly insert probe into product.
CLOSE THE OVEN DOOR -- PRESS START KEY.
AFTER COOK CYCLE IS COMPLETE AND PRODUCT IS READY:
•The display will indicate “DONE”.
•The START/READY indicates will flash, and the oven will beep every 30 seconds.
REMOVE PRODUCT
promptly to avoid overcooking.
Cook by Time
Press COOK º.
Press lit TIME Key µ.
Confirm fan speed.
Adjust the cooking temperature
with the UP or DOWN arrow keys ቤ.
•Time
Indicator ብ will remain lit.
Cook by Probe
Press COOK º.
Press lit PROBE Key
¾ .
Confirm fan speed.
Adjust the cooking temperature
with the UP or DOWN arrow keys ቤ.
•
Probe
Indicator ቧ will remain lit.
Cook by Time
•The display ባ will alternate between cook cycle
temperature and remaining cooking time when
cooking by TIME.
Cook by Probe
•The display will alternate between set cooking
temperature, probe temperature, and elapsed time
when cooking by PROBE.
To terminate beeping, press START/STOP key twice.
To terminate procedure, press START/STOP key twice.
if more than 4-5 seconds elapse before a decision is made,
the mode button must be pushed again to continue.