Alto-Shaam Platinum Series ASC-4G - Manual (Page 21)

Gas Convection Oven - Electronic Control
Pg. 20.
O P E R A T I N G I N S T R U C T I O N S
E L E C T R O N I C C O N T R O L O P E R A T I O N : M E N U P R E S E T S
ERASING A PROGRAM
To erase a program, the oven must be in the PREHEAT mode. The oven cannot be
running a PRESET Menu program.
When the oven is in the PREHEAT mode, press and hold both the CANCEL Key
ƹ and the appropriate number PRESET Key Ƹ to be erased. Hold both keys until
the oven double beeps, and the program's indicator light goes out. This indicates the
program has been erased.
COOK –– USING PRESET MENU KEYS
• Press desired PRESET Key (1 thru 7) Ƹ. Preheat will begin.
• The oven will beep when the preheat temperature has been reached.
• Load food inside the oven.
If cooking by probe, remove probe from its bracket, wipe the tip with a disposable alcohol
pad and insert probe properly into product.
• Close the oven door.
• Press START.
NOTE
Time and Temperature have been programmed in the PRESET key -- they cannot be
adjusted during the PRESET cooking cycle.
If the oven temperature is higher than the PRESET program,
utilize the COOL DOWN mode.